Products

Visit our online store today!

Visit our youtube channel

Safe and fast drilling rig shipping!

Single rotary head Geothermal Drill rigs

Geothermal Drilling Rig

GEO-GENIUS SERIES
GEOTHERMAL DRILL GG648

GEO-TRACK SERIES
GEOTHERMAL DRILL GT635

GEO-DRILL SERIES
GEOTHERMAL RIG GD417
Geothermal Drilling Rig GEO-GENIUS GG648 shown mounted on tracks undercarriage Geothermal Drilling Rig GEO-TRACK GT635 shown mounted on tracks undercarriage Geothermal / Water well Drilling Rig
GEO-DRILL GD417 shown mounted
on tracks undercarriage

Geothermal Drilling Rig GEO-GENIUS GG648 shown mounted on platform Geothermal Drilling Rig GEO-TRACK GT635 shown mounted on Hydrostatic “AWD” mobile Geothermal / Water well  Drilling Rig
GEO-DRILL GWD417 shown mounted
on tandem axle trailer

Drilling Supply’s Geothermal Drilling Rigs were specially designed and manufactured for geothermal, water well and construction drilling. They are highly reliable and offer the drillers and contractors the most efficient and safe drilling experience.


GEO-GENIUS GG648 and GEO-TRACK GT635 SERIES

The GEO-GENIUS series and GEO-TRACKS series geothermal drilling rigs are similar when it comes to power characteristics and depth capabilities. Their main technical differences are their frame assembly (open concept vs. fully covered), their operating controls (hydraulic vs. electronic) and their rod handling systems.

The objective is to alloow our customers to choose between different drilling rigs, according to their drilling priorities.

GEO-GENIUS Geothermal drilling rigs are less expensive and simple by design, relying on robust HYDRAULIC controls.

GEO-TRACK Geothermal drill rigs are more expensive, high-tech drilling rigs, featuring a sophisticated electronic control system, which allows higher efficiency and reduced cost of operations.

Here's a chart comparing the GEO-GENIUS and the GEO-TRACK series:


 

GEO-GENIUS GG648

GEO-TRACK GT635

DRILLING CAPACITIES

Identical

DTH percussion drilling down to:
-  400m/1312 ft with 4.5"(114 mm) rod diameter.
Rotary drilling down to:
-  750 m/2460 ft with 3"  (76 mm) rod diameter;
-  550m/1800 ft with 4" (104 mm) rod diameter;
- 400m/1312 ft with 4.5" (114 mm) rod diameter.
Auger drilling down to:
- 110 m/360 ft with 4.5" (114 mm) rod diameter;
-  60 m/200 ft with 5.5" (143 mm) rod diameter;
- 27 m/90 ft with 11" (286 mm) rod diameter.

MULTIPURPOSE

DTH / Rotary / Auger

DIMENSIONS

Identical

UNDERCARRIAGE & CHASSIS**

Rubber Tracks
Or
Platform***

Rubber Tracks
Or
Hydrostatic All-Wheel-Drive

DIESEL POWER UNIT

156 hp – 116 kw @  2000rpm Electronic U.S. EPA Tier 3, EU Stage III certificate
Or
Adapted for poor fuels

156 hp – 116 kw @  2000rpm Electronic U.S. EPA Tier 3, EU Stage III certificate

HYDRAULIC POWER UNIT & COMPONENTS

Identical

INTEGRATED EXTRA HYDRAULIC POWER SUPPLY ASSYEMBLY

Identical
70 HP max

DRILLING MAST & FEED ASSEMBLY

DTH: 4.5 m pipe length MAX
(longer mast option available)

DTH: 3 m pipe length MAX
(longer mast option available)

MUST STRUCTURE DESIGNED FOR DRILL PIPE OF 6.00 M <> 20’

Available

Available

PULL BACK FORCE

Pull back force 48 000 Lbs / 213 KN

Pull back force 48 000 Lbs / 213 KN

CASING COMPATABILITY

Adaptable for any Casing System of your choice

ON BOARD PIPE RACK

SIDE mounted (4.5 m pipe MAX)

BACK mounted (3 m pipe MAX)

DRILL HEAD ASSEMBLY

Identical

WATER INJECTION

ROD CLAMPS & BREAK-OUT

ROD FEEDER ON MAST

 

✓

ROD HANDLING ROBOT ARM

 

✓

ROD HANDLING COMPLETE FIXTURE

✓

 

MUD & GROUTING PUMP

0-180 g/min. (single cylinder)
0-550 psig

0-180 g/min. (single cylinder)
0-550 psig

CONTROLS

Hydraulic control panel.

Fully electric.
Remote control, ergonomic design for complete operations.
Heated remote controls with aluminum corpus.

PANNELS AND DOORS

Open concept

Fully covered

OPERATIONAL PRODUCTIVITY

✓✓✓✓

✓✓✓✓✓

PRICE

✓✓✓

✓✓✓✓

Note: Some features are optional.
The manufacturer reserves the right to make modifications it deems necessary, without prior notice.
* Subject to ground conditions, compressor or mud pump capabilities, type and a quality of drilling equipments used (pipes etc..) and driller skills.
** Can be transported using a standard 53” flatbed trailer (the maximum height allowed on North American roads is 163”.
*** The Drilling platform can be custom made to fit a specific vehicle chassis specified by the customer, including 6, 8 or 12 wheels trucks, tractors, trailers etc., and will be ready to be bolted (U-bolted) to the truck chassis as specified. If needed, it is also ready for any other setup determined by the Geothermal drilling contractors' operational requirements

 

[Back to top]

GEO – DRILL GWD417 SERIES

After years of intense research and development, we areproud to introduce a more compact, highly maneuverable and powerful top quality geothermal drilling rig – GWD417.

The GWD417 offers all that you have come to expect from our geothermal drill rigs, and now it also features ultra-compact dimensions and light weight.

If you have already seen our geothermal drilling rigs in operation, you would certainly expect a superior quality product that is powerful, efficient and easy to manipulate.

The brand new chassis design found on this geothermal drilling rig makes it smaller, lighter and allows us to offer you a much more competitive price, without compromising rig quality.

The GWD417 can easily drill to depths of 200 meters (656 ft), offering great efficiency and penetration rates.

The standard GWD417 Water well / Geothermal Drilling Rig comes mounted on a tandem axle trailer or tracked undercarriage, but it can also be supplied on a platform, which could be mounted on various types of chassis (truck, outlander, etc.), as per operational requirements.

The GWD417 is designed with the end user in mind. You will be able to benefit from its unique features optimized for high performance, efficiency and reliability in any operational environment.

Key features:


DRILLING CAPACITIES*

DTH percussion drilling 4.5"(114 mm) – 200 m (656 ft)
Rotary drilling 3" (76 mm) - 300 m (984 ft)
Rotary drilling 4" (104 mm) - 275 m (902 ft)
Rotary drilling 4.5" (114 mm) – 200 m (656 ft)
Auger drilling 4.5" (114 mm) - 60 m (196 ft)
Auger drilling 5.5" (143 mm) - 30 m (98 ft)
Auger drilling 11" (286 mm)  - 15 m (50 ft)

BOOM POSITIONING

Dump: 0 to 100° from the horizontal

UNDERCARRIAGE & CHASSIS

Tandem Axle  Trailer
OR
Tracked Undercarriage

POWER UNIT

Diesel - 100 HP (73.55 kW)

HYDRAULIC POWER UNIT & COMPONENTS

Rexroth/Sauer/Danfoss

DRILLING MAST & FEED ASSEMBLY

Specific heavy duty mast structure designed for drill pipe of (3.00 m <> 10’)
Drill Head travel length «Stroke» of (4.7 m <> 15’)

PULL BACK FORCE

17500 Lbs <> 77.8 KN

DRILL HEAD ASSEMBLY

Drill Head Assembly Rineer
3 (three) gears
Automatic constant rotation power control

MUD & GROUTING PUMP

Volume 75 L <> 20 gall
Pressure 20.7 bar <> 300 psig

ROD CLAMPS & BREAK-OUT

Hydraulic rod make / break out

CONTROLS

Hydraulic or Electronic

Note: Some features are optional.
The manufacturer reserves the right to make modifications it deems necessary, without prior notice.
* Subject to ground conditions, compressor or mud pump capabilities, type and a quality of drilling equipments used (pipes etc..) and driller skills.

 

[Back to top]

Please contact us If you have any questions and we will be happy to provide you additional information on our range of geothermal drilling rigs.
Ask for a quotation today and see why drillers around the world trust us.