Water well drill rig «Easy-Drill»
model ED417
Carrier : Tandem Axle Trailer
Drilling techniques : DTH hammer, Auger, Rotary
Drilling applications :Water wells, Geothermal wells, Construction applications, other
The initial configuration of the « Easy-Drill » water well drilling rig is built on double axle trailers, but it also can be supplyed on a platform which can be mounted on all kinds of applications (Mobile truck, outlander, etc.), or can even be mounted on tracks if required.
Drill Head Rineer Model M057
- Automatic constant rotation power control
- Torque capacity 1sr gear: 0-80 rpm 4946 Nm <> 3646 lb-f
- Torque capacity 2nd gear: 0-160 rpm 2471 Nm <> 1823 lb-f
Diesel power unit « Cummins »
- Cummins electronic diesel engine model QSB3.3-4cyl. (24 volts) turbocharged water cooled
- Power 100 hp <> 73 kw @ 2200rpm
- Fuel consumption «Operation» 5.8 L/hr <> 1.53 gal/hr
- Fuel tank 170 L <> 45 galls
- Filtering system two stage (Primary @ security)
- Emission certification: U.S. EPA Tier 3, EU Stage III
- Integrated control safety panel, 24 volts
- Pump drive: Two (2) variable displacement piston pumps, load sensing, pressure compensated, and one (1) gear pump dedicated for accessories.
- Top drive: automatic constant rotation power control
- Hydraulic tank capacity 170 L. <> 45 gall.
- Oil cooler
- 5 micron Filtration system
- Automatic lubricator for the down the hole hammer
- Seal lock type Hose & fittings
- Integrated safety system, over heat, low levels etc.
- Dump ( 0 to 100° from the horizontal)
- Specific heavy duty mast structure designed for drill pipe of (3.00 m <> 10’)
- Drill Head travel length «Stroke» of ( 4.57 m <> 15’)
- Feed system hoisting and pull-down power is provided by link- chain that use powerful hydraulic gear box controlled hydraulically for accurate trust
- Pull down force (17 500 Lbs <> 77.8 KN)
- Pull back capacity (17 500 Lbs <> 77.8 KN)
- Top drive mounting plate is equipped with urethane anti-wear slides
- Standard drilling table
- Standard hydraulic wrench
- Standard manual centralizer
- Collector standard
- Sliding plate with 65° frontal tilt for easy casing installation
- Jib hydraulic winch 2268 kg <> 5000 lbs
- Preventer moving on feed to always be on top of the casing
Rod clamps & Break-out: hydraulic jaws
- Hydraulic clamps 60-200mm <> 2.36”-7.87”
- Hydraulic break-out 60-200mm <> 2.36”-7.87”
- Operated from control panel
Water Injection : FMC pump model A04
- Duplex pistons pump
- Volume: 0 to 33.6 L/min (0 to 8.9 gals/min)
- Pressure: 38 bar <> 550 psig
- Revolution: 500 rpm
- Stainless steel water tank 540 L <> 120 gall.
- Volume 75 L <> 20 gall.
- Pressure 20.7 bar <> 300 psig
Undercarriage & Chassis
- Trailer tandem axle
- (2): Front out-riggers
- (2): Rear out-riggers
- Fully hydraulic panel control
Dimension & Weight (Shipping-Transport)
- Length: 6.70 m <> 22’- 00” (Feed Boom)
- Width: 2.24 m <> 7’-4”
- Height: 2.44 m <> 8’-00”
- Weight: 5896 kg <> 13000lbs
Some of the features are optional
Specifications can be adapted to client's needs on request Weight and dimension are subject to change without notice.
Please contact us if you have any questions and we will be happy to provide you additional information on our range of Water Well drilling equipments upon request.
Ask for a quotation today and see why drillers around the world trust us.